- SMART™ Saddle System
- Book A Test Ride
- About Solution Saddles
- SMART™ Shop
SMART™ Saddles should be stored either on a smooth round surface, such as the Stubbs Saddle Mate or, ideally, on a narrow, rounded saddle pole that sits through the gullet.
Store your SMART™ saddle and any accessories in a dry place away from damp and extreme temperatures.
Always remove the saddle cloth and any pads from your SMART™ saddle and allow to air after each use. Do not store the pads under your saddle as this may cause them to compress unevenly over time, compromising performance and reducing their shelf-life.
It is important that you do not store your SMART™ saddle on metal racks or with items placed on top. To prevent marking or other damage, avoid saddle brackets that support the saddle on the soft underside panels
All SMARTTM saddles from Solution Saddles come with a fleece-lined SMART™ Deluxe Saddle Cover; the water-resistant shell and adjustable elastic trim ensure your saddle is protected from dust, dirt and scratches when not in use.
Leather is a natural material and needs to be protected from drying out and cracking. Environmental factors, such as exposure to sunlight, wind and rain can cause the leather to lose some of its natural properties. It is therefore important to take steps to maintain leather in good condition in order to optimise performance and increase its longevity.
Where available, Solution Saddles recommends using a leather soap & conditioner to not only keep your SMART™ saddle clean and supple, but to protect it from the elements and maintain peak condition. Use regularly to soften new leather, helping it to “wear in”. Continued use will maintain condition and appearance.
On the seat and base panels where soft hide is used, apply conditioner sparingly, and only enough to remove any dirt before buffing to a shine. SMART™ saddle skirts and saddle flaps are made using a pre-oiled leather - it is necessary to lightly top-up these parts with oil occasionally. Black leather is more susceptible to changes to the hue/colour over time as it has to be dyed to give its appearance; this is normal and should be expected from any dyed leather product. The tannery, which supplies the leather, has issued some guidance on maintaining the leather of your new SMART™ saddle over time:
If your SMART™saddle gets wet, apply conditioner straight away then allow to dry in a well aired, warm room. Once completely dry, reapply conditioner until the leather returns to a supple texture and buff the sheen back to the surface with a soft cloth.
It is imperative that breastgirths are not attached to the long girth straps as this can damage them. All SMART™ Jump and Multi-discipline saddles are fitted with knee D-rings fixed to the body of the saddle for the purpose of fitting the SMART X-over Breastgirth or other accessories. Knee D-rings can be retro-fitted to other SMARTTM saddle models on request.
There is always help and advice on hand - our Home Consultation Service is available for routine checks as well as help with fitting to different horses or riders. You can either contact your SMART Advisor directly or get in touch with Solution Saddles’ head office by phone: 01909 720259 or email: email@example.com and we will be happy to assist you.